Scanreco RC400 Mini G2B + Walvoil DPX100 radio remote control for construction equipment
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 663 39...
Show
+48 663 399 034
Poland
Poland
Poland, Choszczówka Stojecka
Greece, Polidendri
Poland, Warsaw
Poland, Police
Greece, Polidendri
Germany, Wiefelstede
Scanreco G2B Mini 6 pads, 12/24 V.
This kit is configured for the most common machine set-ups and supports up to 5 standard crane functions. If you require a different, specialised configuration, we can tailor it to your needs, including variations in solenoids, voltage, number of sections, anti-shock valves, connections, etc. The pressure relief valve can also be adjusted as required. The solenoid type and flow rate can be selected individually to suit your application. Please send us a diagram so that we can assist you further.
The kit is designed for plug-and-play convenience. We take care of everything, from the connectors to the software configuration.
We offer technical support and are available at any time via email, WhatsApp and telephone.
If you have any questions or require assistance, please feel free to contact us at - or -.
Once the order has been placed, the flow rate and pressure can be fully adjusted to the customer’s specific requirements for the machine.
---------------------------------------------------------------------------------------------------- ------------------------------------------------------------
Walvoil DPX 100 hydraulic section valve with compensation, fully proportional
Technical data for the standard configuration:
Inlet section: 32 GPM 120 l/min – Pmax 300 bar 4351 psi Power supply connection: 3/4‘ BPS, tank return connection: 3/4’ BPS
1. Slewing movement – Horizontal movement of the crane 40 L/min 10 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
2. Main lift: 80 l/min, 21 GPM (A+B closed); electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
3. Jib – Horizontal boom extending from the crane, 40 l/min 10 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
4. Extension 60 L/min 16 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
5. Grapple open/close 20 L/min 5 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
Outlet section: with the option to combine valves, with a vent valve (LS relief), with a pressure-reducing valve. Control connection ‘V’ and waste water connection ‘L’ sealed.
Side connections “T1”, “P1”, “LS1” sealed. DBV fixed and sealed to 175 bar at 90 l/min.
Scanreco G2B Mini with 5 levers
- 5 linear levers
- Stop function in accordance with EN ISO 13849-1 Cat. 3, PL e
- Various toggle switches, push-button switches and rotary switches
- Frequency bands: 433–434 or 902–928 MHz (other frequencies available on request)
- Operating range > 100 m / > ~330 ft.
Protection class: IP65
Operating temperature: 20 °C to +70 °C / ~4 °F to +160 °F
- Wired control: standard length 10 metres / ~33 feet.
- G2B receiver PWM 12 or 24 VDC power supply
- Choice of wireless or wired control
- 8 bidirectional proportional outputs
- All analogue outputs are programmable for final speed adjustment
- 14 digital outputs (1 of which is a combined input/output) and 4 digital inputs (1 of which is a combined input/output)
- One DV output for controlling the drain valve
- Radio communication in the ISM band using frequency-hopping technology
- Manual mode available to bypass the radio system by providing only the DV output, thereby enabling manual control via the hydraulic manifold (where available).
- Programmable logic with block, soak, decelerate and ramp functions, and much more
- Please note that cable harnesses and connector sets are NOT included and must be ordered separately if required.
Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (excluding colour display)