Liebherr LTM 11200/9.1 mobile crane

2009 Liebherr LTM 11200-9.1

Superstructure hours : 13313.27
Undercarriage KMs : 30642.0
Undercarriage hours 2988.40

Transmission ZF/ SG/ TC-TRONIC
TELMA brake
Tyres 14.00 R 25

Carrier Engine / Output Liebherr, 8-cylinder, turbo-Diesel, 500kW
Crane Engine / Output Liebherr, 6-cylinder, turbo-Diesel, 240 kW
Drive / Steering 18 x 8 x 18
Travel Speed 75 km/h
Operational Weight 96t


Superstructure

Telescopic Boom 18.3-100m (T1-T3 50m / T4-T7 50-100m)

Lattice Jib 6.5m – 78m
TELE boom extension 10m
Guyed Tele Boom Y-Guy TY
Fixed Fly adapter 0-60 degree hydr
Number of Winches - 3
Max. lifting capacity 1200t at 2.5 m radius

Counterweight 202t
Safe Load Indicator LICCON


1 - Basic machine with 4X swing-out outriggers

1 - telescopic boom T1-T3 (50m) with Lifting unit and transport support

1 - telescopic boom T4-T7 (extension from 50m to 100m) with transport support

1 - TY frame incl transport support

1 - boom extension 6m with exenter (VE-6m)

1 - winch III incl, rope, bottom hook block and transport support

1 - Small parts

1 - N-assembly unit incl rods

1 - luffing cylinder support

1 - ladder

1 - boom extension 6m (V-6m)

1 - TF-abaptor (hydraulic)

1 - Winch I Incl, rope 940m

1 - Hook block 125T 3 Sheaves

1 - Counterweight base plate (22,000 lbs total)

1 - T7-adaptor

1 - Winch II Incl, Rods

1 - Boom extension 10m (V2-10m) Inklm rods

1 - Support block for boom extension 10m

1 - T3-adaptor

1 - Interm, section 6m (NA/NM)

1 - Boom head bogie

1 - hydraulic aggregate for telescopic boom lifting unit

1 - Interm, Section 6m (NA)

1 - NM-reducing section

1 - NM-head section

4 - outrigger plates

1 - interm, section 12m (NA/NM)

1 - Interm, section 12m (NA/NM

4 - Counterweight slabs (5,000 lbs each 20.000 lbs total)

16 - Counterweight slabs (10,000 lbs each/160.000 lbs total)


Regarding this crane the configurations are:
The maximum luffing jib of the crane is T3YV2EN -20.2m+78m with one 3 sheave hook block.
V2 and V3 sections are also available to make T7YVEV3V2NZF.
The only configuration the crane wont work on is T3Y as the adaptor that is mounted on the T3 boom is not available.