Elektra MD 15.69 other laboratory equipment
Grenzach-Wyhlen6908 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7624 98...
Show
+49 7624 9889756
+49 170 81...
Show
+49 170 8106758
Germany 
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Type: MD 15.69
Location: D-79541 Lörrach
* Manufacturer: ELEKTRA electric motors, Dillingen/Donau, Germany
* Power: 1,1 kW
* Protection class: IP54
* Efficiency class: EFF2
* Operation: 3~ (three-phase current)
Origin: Germany
special features: Sight glass cover, safety bracket, multiple process connections
This FLUID agitated vessel type MD 15.69 The ELEKTRA electric-driven mixer is a high-quality process solution for the uniform mixing, emulsification, or homogenization of liquid and pasty media. The machine is designed for continuous industrial operation and features various connection options and a quick-release lid.
The system consists of the parts shown in the pictures.
The device is in very good used condition and is ready for use.
Advantages:
- Robust design: Stainless steel construction with stable bearings
- Versatile: Suitable for liquid and viscous media
- Safe & practical: Clear viewing opening and safety bar
- Industrial engine: Three-phase motor from ELEKTRA with high efficiency
---------------------------------------------------------------
2. General functions
- Process tank with integrated agitator
- Stirring motor from ELEKTRA (3-phase, 1.1 kW according to nameplate)
- Direct drive agitator (top-mounted)
- Operation via external control cabinet (not included in the picture)
- Product connections for CIP / cleaning / ventilation
- Can be screwed on with a mobile base plate or stationary
- Applications: Mixing of liquids, suspensions, emulsions
---------------------------------------------------------------
3. CO₂ savings
Reusing this used process vessel avoids the energy-intensive construction of a new stainless steel agitator vessel. This saves an estimated 2,500–3,500 kg CO₂,
This corresponds approximately to:
- the CO₂ emissions of a Car per 15,000 km, or
- 5 months electricity consumption a four-person household
Typ: MD 15.69
Standort: D-79541 Lörrach
* Hersteller: ELEKTRA Elektromotoren, Dillingen/Donau, Germany
* Leistung: 1,1 kW
* Schutzart: IP54
* Effizienzklasse: EFF2
* Betrieb: 3~ (Drehstrom)
Herkunft: Deutschland
Besonderheiten: Sichtglasdeckel, Sicherheitsbügel, mehrere Prozessanschlüsse
Dieser FLUID Rührbehälter Typ MD 15.69 mit elektrischem Antrieb von ELEKTRA ist eine hochwertige Prozesslösung für das gleichmäßige Mischen, Emulgieren oder Homogenisieren von flüssigen und pastösen Medien. Die Maschine wurde für den industriellen Dauerbetrieb ausgelegt und verfügt über diverse Anschlussmöglichkeiten sowie einen Sichtdeckel mit Schnellverschluss.
Die Anlage besteht aus den Teilen die in den Bildern zu sehen ist.
Das Gerät befindet sich in sehr gutem gebrauchten Zustand und ist betriebsbereit.
Vorteile:
- Robuste Ausführung: Edelstahlkonstruktion mit stabiler Lagerung
- Vielseitig einsetzbar: Für flüssige und viskose Medien geeignet
- Sicher & praktikabel: Klare Sichtöffnung und Sicherheitsbügel
- Industriemotor: Drehstrommotor von ELEKTRA mit hoher Effizienz
---------------------------------------------------------------
2. Allgemeine Funktionen
- Prozessbehälter mit integriertem Rührwerk
- Rührmotor von ELEKTRA (3-Phasen, 1.1 kW laut Typenschild)
- Rührwerk mit Direktantrieb (Top-Mounted)
- Bedienung über externer Schaltschrank (nicht im Bild enthalten)
- Produktanschlüsse für CIP / Reinigung / Be- und Entlüftung
- Mit mobiler Bodenplatte oder stationär verschraubbar
- Einsatzbereiche: Mischen von Flüssigkeiten, Suspensionen, Emulsionen
---------------------------------------------------------------
3. CO₂-Einsparung
Die Wiederverwendung dieses gebrauchten Prozessbehälters vermeidet den energieintensiven Bau eines neuen Edelstahl-Rührbehälters. Das spart geschätzt 2.500–3.500 kg CO₂.
Das entspricht etwa:
- dem CO₂-Ausstoß eines PKW auf 15.000 km, oder
- 5 Monate Stromverbrauch eines Vier-Personen-Haushalts