Kaiser KSTU ZA 2000-15P metal press
Niederhelfenschwil8100 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+41 71 948 ...
Show
+41 71 948 70 63
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
50 Hz
Switzerland, Niederhelfenschwil
+ Feeder KAISER KWV 250
+ 2-axis gripper bars transfer SANDER with adjustable pitch
+ table cushion rail with various cushions and fillers (separate data sheet available)
Press Design
drive system: eccentric / crank
frame design: H-frame, tie rod
openings in uprights: yes
table cushion: yes
feedstock transport direction: left to right
Press forces
total force (nominal): 200 to
Press Table
table surface (left-right): 1780 mm
table surface (front-back): 1300 mm
opening in bed (left-right): 1445 mm
opening in bed (front-back): 260 mm
Slide
slide force: 200 to
table surface (left-right): 1500 mm
table surface (front-back): 1100 mm
stroke: 178 mm
stroke rate (max.): 120 /min
slide (mechan. Press)
slide adjustment: 150 mm
stroke rate (min.): 20 /min
stroke rate (max.): 120 /min
Die Cushion (table cushion)
number of cushions: 11
cushion force: 3 to
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 542 mm
Decoiler
design: twin reel
sheet width max.: 260 mm
coil weight max.: 2 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
Leveller Unit
sheet width max.: 250 mm
sheet thickness max.: 2 mm
sheet thickness min.: 0.3 mm
number of leveller rolls: 19
diameter of leveller rolls: 18 mm
feed velocity min.: 5 m/min
feed velocity max.: 60 m/min
loop controls: yes
Strip-Feeder
feeder type: roll feeder
sheet width max.: 250 mm
Transfer System
distance between tools, stroke X max.: 260 mm
distance between tools, stroke X min.: 60 mm
stroke Y fix: 55 mm
Inner width clamping rails closed max.: 455 mm
Inner width clamping rails closed min.: 205 mm
Electrical specifications
mains voltage: 400 V
mains frequency: 50 Hz
Attachments (presses)
decoiler: yes
leveller unit: yes
strip feeder: yes
gripper transfer system: yes