VDF Boehringer DUS 560 ti x 1500 metal lathe
Monheim am Rhein6666 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany 
50 Hz
Germany, Location:düsseldorf
turning diameter 570 mm
turning length 1500 mm
control Siemens Sinumerik 810 D
spindle bore 62 mm
spindle turning speed - stepless 3 - 2500 U/min
transmission ratio 2
feeds - longitudinal max. 10000 mm/min
feeds - cross max. 5000 mm/min
tailstock quill taper MT 5
main drive motor 20/30 kW
Dimensions (LxWxH) 4,10 x 2,16 x 1,98 m
total power requirement 35 kVA
weight of the machine ca. 5,3 t
The machine was used in 1-shift operation.
Equipment/accessories:
* CNC control SIEMENS Sinumerik 810 D
* Capto/Parat tool/swivelling holder
* Full clamping cylinder Forkardt OKRJ 120 for operating power chucks
* Hydraulic unit Hydac
* Steady-rest, diameter 20-315 mm
* 3-jaw manual chuck, diameter 315 mm
* Coolant device
* Chip conveyor
Without extraction unit
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technische Details
Drehdurchmesser 570 mm
Drehlänge 1500 mm
Steuerung Siemens Sinumerik 810 D
Spindelbohrung 62 mm
Spindeldrehzahlen - stufenlos 3 - 2500 U/min
Getriebestufen 2
Vorschübe - längs max. 10000 mm/min
Vorschübe - plan max. 5000 mm/min
Reitstock-Pinolenaufnahme MK 5
Hauptantriebsmotor 20/30 kW
Abmessungen LxBxH 4,10 x 2,16 x 1,98 m
Gesamtleistungsbedarf 35 kVA
Maschinengewicht ca. 5,3 t
Zusatzinformationen
Die Maschine wurde 1-schichtig eingesetzt.
Ausstattung/Zubehör:
* CNC-Steuerung SIEMENS Sinumerik 810 D
* Werkzeug-/Schwenkhalter Parat Gr. 3, Sandvik Capto C4
* Vollspannzylinder Forkardt OKRJ 120 zum Betätigen von Kraftspannfuttern
* Hydraulikaggregat Hydac
* Setzstock feststehend, Durchmesser 20-315 mm
* 3-Backen-Handspannfutter, Durchmesser 315 mm
* 2 Späneschutztüren
* Kühlmitteleinrichtung
* Späneförderer
Diámetro de giro 570 mm
Longitud de giro 1500 mm
Control Siemens Sinumerik 810 D
Diámetro del husillo 62 mm
Velocidades del husillo - infinitamente variable 3 - 2500 rpm
Etapas de engranaje 2
Velocidades de avance - longitudinal máx. 10000 mm/min
Avance plano máx. 5000 mm/min
Soporte de la caña del contrapunto MK 5
Motor de accionamiento principal 20/30 kW
Dimensiones LxAxH 4,10 x 2,16 x 1,98 m
Potencia total necesaria 35 kVA
Peso de la máquina aprox. 5,3 toneladas
Información adicional
La máquina se utilizó en 1 turno.
Equipamiento/accesorios:
* Control CNC SIEMENS Sinumerik 810 D
* Portaherramientas/inclinable Parat tamaño 3, Sandvik Capto C4
* Cilindro de apriete completo Forkardt OKRJ 120 para accionar mandriles de potencia
* Unidad hidráulica Hydac
* Mordaza fija, diámetro 20-315 mm
* Plato manual de 3 garras, diámetro 315 mm
* 2 puertas de protección contra virutas
* Unidad de refrigeración
* Transportador de virutas
Sin extracción.