Traub TNK 36 metal lathe
Weißenfels
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany 
Germany, Weißenfels
Germany, Kaiserslautern
Germany, Tirschenreuth
Germany, Kaiserslautern
Germany, Kaiserslautern
TROLL
Model
TNK 36
Year
2003
Observations
TRAUB TNK 36 Moving Head CNC Lathe
Working hours: Approx. 124,705 h (May 2026)
Overview
High-production automatic CNC lathe designed for machining complex parts from bar. Equipped with main spindle and motorized tailstock, C-axes, motorized tools and automatic bar loader, allowing unattended work in long series.
Control CNC
· TRAUB TX8i CNC Control (64-bit)
· 10.4" flat panel
· Additional RS232 port
· MDE interface for production monitoring
· Tool monitoring
· Rigid threading without compensated tap holders
Main Spindle
· Bar pitch: Ø36 mm
· Maximum speed: 6,300 rpm
· Engine power:
o6.7 kW (continued)
ø10.7 kW (maximum)
· Integrated C-axis
· Hainbuch Fastening System
· Hainbuch manual quick-change device
Counter spindle
· Motorized counterspindle
· Integrated C-axis
· Machining Back Pressure System
· Automatic parts ejector
· Plato Hainbuch Axfix
Turret & Tool Holder
Superior Tool Holder
· Motorized Tools
· Electronic transmission
· X3 cross axis for front device
Front Station
·5 positions
· Motorized Tools
Parting Station
· Motorized tools for post-cut operations
Parts Unloading System
· Automatic Pull-Out Forceps
· Jaw sets included:
oØ5-8 mm
oØ8-20 mm
oØ20-36 mm
Refrigeration and Filtration
Refrigerant System
· Tank: 230 liters
· Standard pressure: 7 bar
· Caudal: 50 l/min
Internal Cooling
· Coolant through tool: 30 bar
· High Pressure:
O120 Bar Front Station
O120 Bar Rear Station
Filtering
· KNOLL VRF 150/750 Rotary Vacuum Filter
· Suitable for:
oAluminum
oSteel
oBrass
o Plastics
· Washing gun included
Additional Equipment
· Articulated Belt Type Chip Conveyor
· Discharge height: 950 mm
· Bar Loader Preparation
· Guide tubes for Ø25 mm and Ø36 mm
· Synchronised workpiece stop
· Brankamp CMS 100 collision detection system on main spindle and tailstock
Automatic Bar Loader
Fabricante: FMB
Model: Turbo 5-42 XT / 3200 C
Year: 2003
Features:
· Maximum bar length: 3,000 mm
· Maximum diameter: Ø36 mm
· Automatic operation for continuous and unmanned production
Electrical Data
· Installed power: 22 kW
· Power supply: 400 V
· Frequency: 50 Hz
· Rated current: 60 A
Machine Status
· No known defects according to the owner.
· In productive operation until May 2026.
· Working in 2.5 shifts.
· Currently stopped but electrically connected.
· Possibility of inspection and test in operation.
Outstanding advantages
✅ Main head and counter spindle with C-axis.
✅ Motorized tools for milling and drilling operations.
✅ High-pressure cooling up to 120 bar.
✅ Automatic 3 m bar loading system.
✅ Tool monitoring and collision monitoring.
✅ Ideal for serial production of precision parts in steel, aluminium, brass and plastics.