Baykal BLS-NL 2060 4kW Fiber laser cutting machine

This BAYKAL BLS-NL 2060 4kW Laser cutting machine was manufactured in the year 2014. It is equipped with a Beckhoff CNC control unit. The machine has a laser power of 4 kW as well as a max. load capacity of 4450 kg. See PDF (EN) with technical benefits attached below.
application type: Laser Cutting
Location: Hungary
machine type: Laser Cutting Machines (CO2)
availability: Immediately
control unit brand: Beckhoff
GINDUMAC ID: HU-LAS-BAY-2014-00001
Laserpower: 4 kW
Workpiece drm over bed: 2000 mm
Workpiece drm over support: 6000 mm
Table load: 4450 kg
Cutting head precitec procutter 2. 0- Focusing lenses 150 mm- Linear rails (bosch rexroth)- Rapid traverse 115 m/min. 150 m/min- Vector speed 165 m /min 215 m/min- Acceleration 2. 2g (22m/s2) 3. 0 g (30m/s2)- Absolute positioning accuracy ± 0. 02 mm ± 0. 01 mm- Repeatability ± 0. 02 mm ± 0. 01 mm- Programmable feed rate up to 100 m/min up to 125 m/min- Transfer table motorized motorized - automatic exchange
Baykal uses a precitec laser head
which allows for the best results and constant peak performance on the material surface of the final product.- Thanks to the capacitive sensor
the distance between the laser head and the workpiece is constant.- The laser head is equipped with a cassette system.- The cutting head also includes a lens protection mirror. The mirror protects the cutting lens
thus ensuring its long life. The easy-to-replace and inexpensive protective mirror allows trouble-free operation without any problems with the lenses.- The cutting head is equipped with a collision protection system. In the event of a collision with the workpiece
the head easily detaches to avoid further damage.- Automatic nozzle cleaning - and adjustment // gas control and delivery system- The machine is equipped with an automatic gas selection system. Depending on the cutting process
the machine automatically selects and adjusts the cutting and auxiliary gases. The low- and high-pressure nitrogen
oxygen and air cutting
and auxiliary gas lines are all connected- Twincat cnc control software for beckhoff controls pc-based control software with full cnc functionality covers the entire range of classic cnc functions- Ipg photonics fiber laser- The laser beam is created inside the fiber and reaches the cutting head without interruption
except for the beam coupler or switch