Weinig Profimat 23 E four sided planer
Aalen6989 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7361 55...
Show
+49 7361 5579236
$16,810
Four-sided planer WEINIG Profimat 23 E
Automatic planer and moulder
Used, year of construction 1998
5 spindles: bottom - right - left (mobile spindle) - top - bottom
Automatic width adjustment
WEINIG ATS positioning control
Working width 20 - 230 mm
Working height 8 - 120 mm
1st spindle down: 5.5 kW, 40 mm, 6000 rpm
Tool flight circle 125 - 145 mm, axial adjustment 5 mm
Folding device, hardened table insert, mechanical brake
2nd spindle right: 7.5 kW, 40 mm, 6000 rpm
Tool flight circle 15 mm below table level 100 - 200 mm, tool flight circle 40 mm below table level 100 - 180 mm, max. moulder depth 35 mm, axial adjustment travel 40 mm, mechanical brake
3rd spindle on the left (mobile spindle with ATS system): common motor with the 2nd spindle, 40 mm, 6000 rpm, tool flight circle 15 mm below table level 100 - 200 mm, tool flight circle 40 mm below table level 100 - 180 mm, max. moulder depth 35 mm, axial adjustment path 40 mm, mechanical brake
4. spindle top: 7.5 kW, 40 mm, 6000 rpm
Tool flight circle 112 - 200 mm, max. Moulding depth 35 mm, axial adjustment range 40 mm
Split pressure shoe in front of upper spindle, adjustable to tool flight circle and swiveling away from the tool, spring-loaded, mechanical brake
5th spindle below: 5.5 kW, 40 mm, 6000 rpm
Tool flight circle 112 - 200 mm, max. moulder depth 15 mm, axial adjustment range 40 mm, mechanical brake
All moulder spindles dynamically balanced for high concentricity
Feed 3 kW, mechanical brake, infinitely variable 5 - 24 m/min
Feed roller in front of 1st spindle pneumatically controlled high-low
Adjustment travel of feed rollers in relation to left spindle, axial 35 mm
Durofer steel rollers, diameter 140 mm
Dressing table 2000 mm long
Manual waxilite pump
1 driven roller in the outfeed table
Lateral roller pressure in front of the left-hand spindle, moving and spring-mounted
Pressure roller from above, telescopic spring-mounted
Both axes of all spindles - with the exception of the 1st spindle - are equipped with mechanical digital displays
Pressure shoe feed and discharge after the upper spindle with mechanical digital displays
"DigiSet" (digital double display) for left and upper spindle (set tool radius - read wood dimensions)
Mobile spindle (1 axis) automatic adjustment of the left vertical spindle to different workpiece widths
Can also be used as a positioning spindle for 1 fixed dimension at a time
Min. working height 12 mm
Central position of lubrication points on the front of the machine
Including 4 standard Centrolock 530 cutter heads
Complete technical documentation
Transport dimensions approx. 4000 x 1800 x 1900 mm LWH
Weight approx. 3000 kg
To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment
Sold as-is
Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: "purchased as inspected"
Terms of payment: Prices plus VAT, payment before collection or dispatch
Terms of delivery: ex warehouse or location
Our general terms and conditions apply, which can be viewed on the Internet at
show contacts
Please pay particular attention to article 9 regarding complaints and returns!