Final drive for Doosan DX258 DX260 midi excavator

Final drive for Doosan DX258 DX260 midi excavator
price on request
Contact the seller
Call me back
Final drive for Doosan DX258 DX260 midi excavator - Machineryline
Final drive for Doosan DX258 DX260 midi excavator | Image 1 - Machineryline
Final drive for Doosan DX258 DX260 midi excavator | Image 2 - Machineryline
Final drive for Doosan DX258 DX260 midi excavator | Image 3 - Machineryline
Interested in the ad?
Request additional photos
1/3
Price:
on request
Notify me when price changes
Type: final drive
Spare part type: original spare part
Year of manufacture: 2020
Location: China
Placed on: Oct 22, 2026
Machineryline ID: PZ52926
Condition
Condition: new
Warranty:: 12 months

More details — Final drive for Doosan DX258 DX260 midi excavator

DX258 DX260 Final Drive for Excavator spare parts Travel Motor Assembly Aftermarket

Product Overview

The Doosan DX258 and DX260 are 25‑to‑26‑ton excavators built for general construction, quarry loading and large‑site grading — machines that balance dig depth with fuel economy on modern production crews. Under each track frame sits the travel motor assembly, the unit that takes high‑pressure oil from the main pump and turns it into the slow, torque‑rich pull moving the machine across uneven ground.

On a worked Doosan DX, the drive wears down in ways that crews often dismiss until they can no longer. One track lags on the ramp climb, the track shell warms faster than its opposite after a few cycles, and a low note builds through the floor under reversing. Most operators keep digging — but by then the piston block and valve plate have been lapping swarf into the oil. This aftermarket unit reproduces the original motor‑and‑reducer pairing as one sealed, bench‑run assembly, covering both the DX258 and DX260, so the worn drive lifts out whole and the new one bolts straight in.

Core Advantages

1. One assembly covers both DX258 and DX260
The travel motor platform is shared across these two Doosan models, so workshops running a mixed fleet keep one unit on the shelf rather than two separate parts.

2. A lapped piston group that holds pressure
The cylinder block, piston shoes and valve plate are finished to close clearance, so oil pressure does not bleed internally. Both tracks pull in step — no drift, no lazy side, no hesitation when the bucket loads up.

3. Hardened gears for modern production cycles
Doosan DX machines run long shifts on subdivisions and road jobs. Case‑hardened planetary teeth share the load across several surfaces, and controlled backlash keeps the reducer quiet.

4. Sealed for dust, mud and pressure washing
Whether the site is dusty topsoil or muddy clay, fresh shaft and housing seals keep grit out of the lube. That is the line between a drive that reaches its first rebuild and one that does not.

5. Aftermarket price for a high‑hour fleet
An OEM exchange drive carries a premium that is hard to justify on a worked DX. This unit restores full track mobility at a fraction of that cost, with sample and bulk supply available.

Manufacturing & Quality Control

Parts are machined to Doosan print, heat‑treated at wear points, and assembled in a clean shop. Each finished drive runs on a hydraulic stand while torque, leakage and noise are logged; units outside spec are reworked before packing. The internals are fogged with preservation oil, ports are plugged, and the assembly ships on shock‑absorbing dunnage.

Frequently Asked Questions

Q1: How do I confirm this fits my DX258 or DX260?
A: Send the machine serial number and a photo of the old drive's tag. Doosan build variants can differ between the two models, so we cross‑check before dispatch.

Q2: Is this the complete motor and reducer?
A: Yes — the listing is the full travel motor assembly with planetary reduction as one bolt‑on unit. If you need only internal parts, ask and we will check availability.

Q3: What symptoms mean the drive is wearing out?
A: Uneven track speed, pulling to one side, a hot or noisy track motor, and tracks that hesitate under load. Catch it before swarf spreads through the whole travel circuit.

Q4: Can I ship this by sea to African ports?
A: Yes — drives this size ship well by sea. Tell us the destination port and we will quote door‑to‑port or door‑to‑door, including any inland trucking needed.

Q5: What is the warranty position?
A: Materials and build defects are covered. Damage from dirty oil, debris in the motor, track obstruction, overload or incorrect fitting is excluded. Photograph any arrival damage before uncrating.
Request additional information
Important
Description provided by the seller. Please verify all details directly with the seller.
Purchase tips
Safety tips
Seller Verification

If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.

Price Check

Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.

Do not buy products which price is too different from the average price for similar equipment.

Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.

Doubtful prepayment

The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.

Varieties of this fraud may include:
  • Transfer of prepayment to the card
  • Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
  • Transfer to the “Trustee” account
  • Such a request should be alarming, most likely you are communicating with a fraudster.
  • Transfer to a company account with a similar name
  • Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
  • Substitution of own details in the invoice of a real company
  • Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Found a fraud?
Let us know
Safety tips
Similar ads
Price on request
Final drive
China
Belparts Engineering Machinery Limited
Contact the seller
Price on request
Final drive
K1037757
China
Belparts Engineering Machinery Limited
Contact the seller