Holz-Her AURIGA 1308 XL Black Edition edgebander
Pullach
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Kaiserslautern
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Wiefelstede
Germany, Pullach
Netherlands, Rotterdam
Germany, Pullach
Germany, Pullach
Germany, Kaiserslautern
Netherlands, Rotterdam
Netherlands, Rotterdam
Edge banding machine
Type: AURIGA 1308 XL Black Edition
Manufacturer: Holz-Her
Avaílable: 7/2026
Edge thickness (rolled material): 0.4 – 3 mm
Edge thickness (strip material): 0.4 – 8 mm
Edge cross-section: max. 6 × 42 mm
Edge height: max. 65 mm
Workpiece thickness: 8 – 60 mm (with corner copying 12 – 60 mm)
Workpiece width: min. 65 mm
Workpiece length: min. 160 mm (without corner copying) / min. 180 mm
Feed speed: 10 m/min
Equipment and control
Edge Control 19 control system with 18.5” touch color display
Rotating and tilting control panel at eye level
Motorized adjustable pressure bridge
Gluing technology – iTronic
Adaptive pressure and glue dosage control
Automatic fine-tuning according to material type
Optimization of edge thickness and glue type for best results
Automation package includes
Glue quantity control
Adaptive trimming knife
Adaptive pressure unit
Glue remaining indicator
Fully automatic PUR flushing routine
Aggregates and units
Pre-milling unit FG201: 2 milling heads (counter-rotating and synchronous)
diamond cutters Ø70×64×30 mm (Z2+2)
Edge feeder 1903: automatic strip transport (capacity up to 40 mm)
Gluing system Glu Jet GJ301 (2.3 kW)
Hybrid technology for EVA and PUR adhesives
Possibility of using cartridges and granules (1.4 kg cartridge / 1.5 kg granules)
Clean adhesive joint along the entire length of the board
Pressure unit 1912-3: pneumatic (1 driven roller + 2 conical rollers)
Trimming unit 1918: (2 × 0.45 kW
12,000 rpm)
rotating 0/10°
Multifunctional milling unit 1827 MOT4
Trimming of the upper and lower longitudinal edge
Pneumatic rotating mechanism and pneumatic tilting for 15° bevel from the control unit
Motorized positioning of the copying shoes and adjustment of the milling motors
Pneumatic vertical copying rollers with fine adjustment in 0.1 mm increments for overlap milling
Finishing and special units
Corner rounding unit (1827): (1 × 0.35 kW
12,000 rpm). Corner copying function up to an edge thickness of 3 mm
with DIA tool R=2 mm
Scraping unit 1929 MOT4: including High-Gloss package with motorized adjustment of the horizontal copying rollers and pneumatic adjustment (separately up and down)
Surface scraper FK701: with pre- and scraping for perfect removal of adhesive residues
Polishing unit 1940: (2 × 0.09 kW
1,400 rpm) with two textile discs
tiltable in the range of 0 - 5° for finishing and edge shine
Accessories: Air nozzles for a clean machining process
Machine in good condition
fully functional
under power
Find more here
show contacts
Contact us at
show contacts