New NKO Anfassystem UZ12 ULTRALIGHT chamfering machine
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
workpiece length -- mm
work piece width 12 mm
range of angles 30/45/22,5/37,5/50 °
weight of the machine ca. 30 kg
diameter -- mm
workpiece length -- mm
work piece width 12 mm
range of angles 30/45/22,5/37,5/50 °
weight of the machine ca. 30 kg
diameter -- mm
workpiece length -- mm
work piece width 12 mm
range of angles 30/45/22,5/37,5/50 °
weight of the machine ca. 30 kg
diameter -- mm
workpiece length -- mm
work piece width 12 mm
range of angles 30/45/22,5/37,5/50 °
weight of the machine ca. 30 kg
diameter -- mm
workpiece length -- mm
work piece width 12 mm
range of angles 30/45/22,5/37,5/50 °
weight of the machine ca. 30 kg
diameter -- mm
workpiece length -- mm
work piece width 12 mm
range of angles 30/45/22,5/37,5/50 °
Chamfering system UZ12 ULTRALIGHT - KIT 30 + 45
Maximum bevel width 12 mm with automatic feed
The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines
advance in the market. Thanks to its compact size and light weight
it is not only suitable for workshops, but also for assemblies. The
Machine is equipped with the automatic feed and therefore does this
Working with the UZ12 ULTRALIGHT very comfortably.
* For conventional steel (up to 600 MPA/87022 PSI strength),
Brass, copper and aluminum materials
* For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm
* Application range of sheet thickness 3 - 35 mm
* Beveling of pipes from an inner diameter of 95 mm
* Variable setting of the desired bevel using an exchangeable holder kit
for any given angle
* Double-sided bevel (X, K) with no material handling
* Silent working
* Equipped with an automatic feed
* Stationary or mobile use
* The machine works with large workpieces without any support
a speed of 1.8m/min
* Smaller workpieces are placed directly in the machine
* Lightweight and compact design, handleable by one operator
* Motor thermal protection
- Max. bevel width (hypotenuse): 12 mm
- Bevel angle: 30 / 45 / 22.5 / 37.5 / 50 (replaceable KIT)
- Area of application sheet thickness: 3 - 35 mm
- Motor: 400W
- Feed speed: 1.8 m/min
- Dimension: 470 x 294 x 523 mm
** We can also offer you an optional 3D manipulator (mobile) for this
device on **
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Werkstücklänge -- mm
Werkstückbreite 12 mm
Winkelbereich 30/45/22,5/37,5/50 °
Maschinengewicht ca. 30 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 12 mm
Winkelbereich 30/45/22,5/37,5/50 °
Maschinengewicht ca. 30 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 12 mm
Winkelbereich 30/45/22,5/37,5/50 °
Maschinengewicht ca. 30 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 12 mm
Winkelbereich 30/45/22,5/37,5/50 °
Maschinengewicht ca. 30 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 12 mm
Winkelbereich 30/45/22,5/37,5/50 °
Maschinengewicht ca. 30 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 12 mm
Winkelbereich 30/45/22,5/37,5/50 °
Anfassystem UZ12 ULTRALIGHT - KIT 30 + 45
Maximale Fasenbreite 12 mm mit automatischem Vorschub
Die UZ12 ULTRALIGHT ist eine der leichtesten Anfasmaschinen mit automatischem
Vorschub auf dem Markt. Dank seiner kompakten Grösse und des geringen Gewichts
eignet sie sich nicht nur für Werkstätten, sondern auch für Montagen. Die
Maschine ist mit dem automatischen Vorschub ausgestattet und macht daher das
Arbeiten mit der UZ12 ULTRALIGHT sehr komfortabel.
* Für konventionellen Stahl (bis zu einer Festigkeit von 600 MPA/87022 PSI),
Messing, Kupfer und Aluminiummaterialien
* Zum Anfasen von Werkstücken mit den Mindestmassen von 65 x 60 x 3 mm
* Einsatzbereich der Blechstärke 3 – 35 mm
* Anfasen von Rohren ab Innendurchmesser 95 mm
* Variabler Einstellung der gewünschten Fase mittels austauschbaren Halter-Kit
für jeden gegebenen Winkel
* Doppelseitige Fase (X, K) ohne Materialhandhabung
* Geräuschloses Arbeiten
* Ausgestattet mit einem Automatischen Vorschub
* Stationärer oder mobiler Einsatz
* Die Maschine arbeitet mit grossen Werkstücken ohne jede Unterstützung mit
einer Geschwindigkeit vom 1,8m/min
* Kleinere Werkstücke werden direkt in die Maschine eingelegt
* Leichtes und kompaktes Design, händelbar durch einen Bediener
* Thermischer Motorschutz
- Max. Fasenbreite (Hypotenuse): 12 mm
- Fasenwinkel: 30 / 45 / 22,5 / 37,5 / 50 (austauschbares KIT)
- Einsatzbereich Blechstärke: 3 – 35 mm
- Motor: 400 W
- Vorschubgeschwindigkeit: 1,8 m/min
- Abmessung: 470 x 294 x 523 mm
** Gerne bieten wir Ihnen Optional einen 3D-Manipulator (mobil) für dieses
Gerät an **