New TyreON TPH50T-3 Air hydraulic jack 50 Tons - Minimum height 15 cm car jack

Capacity 50T Air floor jack
3-stage jack 50T - 30T - 15T
Lifting height 15 cm - 49,5 cm
Model Long chassis - Long bar
Weight - Total length 53 kg - 208 cm
Application Intensive commercial use
Delivery includes Extensions 110 + 40 + 20 mm
Hydraulic oil is filled

Long chassis - Long bar
Truck air floor jack for safe lifting of trucks, trailers, commercial vehicles, buses, construction-, industrial- agricultural machines and vehicles.
Nearly every lifting point can be reached with it's minimum height of 15 cm. With it's lifting height of 49,5 cm this air hydraulic floor jack is perfect for vehicles with high ground clearance.
CE approved: EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Moveable Jacks
Metal shrinks or expands due to temperature changes, a TyreON air floor jack will not fail at extremely low or high temperatures.
The low profile air hydraulic floor jack is load tested at -25 ° C to + 45 ° C. Static and dynamic off-center load safety tests have also been realized.
The handle can be locked in 3 positions; 45º, 90º and 180º.
The cylinders are internally and externally chrome-plated and resistant to wear and corrosion.
In addition, each cylinder comes with 2 industrial seal rings to prevent oil escape.
Stage 1
Stage 2
Stage 3
This air floor jack with 3 heavy duty pistons needs 8-12 Bar compressed air to lift 50,000 kg loads. Our air hydraulic floor jacks are easy to operate and have many safety options, such as the joystick with dead man's control that also controls an evenly slowed descent.
TPH50T-3 air floor jack -low profile air jack
Truck air floor jack - Functional and Safe
Dead man's control
  -  
When the hold-to-run joystick is released, the air floor jack switches off and comes to a stop immediately
Pressure relief valve
  -  
Prevents damage to the truck when the air hydraulic floor jack is to heavy
Descend the load evenly
  - 
A pressure reducing valve ensures an evenly slowed fall, even with the heaviest load
Lifts quickly
  - 
 Thanks to the pneumatic high pressure pump
Accelerated
 to the load -  
System to bring the cylinders onto the load at a higher speed and also to lower it quickly without any load
Solid chassis  - 
 Made of thick sheet steel, ultimate protection of the pneumatic high pressure pump and other internal parts
Oil circulation
  - 
For example, if the low profile air jack falls on its side, no oil escapes
Fixed position and evenly loaded lifting
  -
 non-return valves guarantee a fully fixed position with loads at all heights and a controlled even lifting speed under load
TPH50T-3 Air hydraulic jack 50 Tons - Minimum height 15 cm