Renishaw AM 400 3D printer
Monheim am Rhein6666 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany 
working length - mm
work height max. - mm
Control -
Laser Melting System / 3D-printer Powder Bed Fusion
The new purchase price was EUR 289.850,- + the oven.
Accessories:
Dehumidifier
Cooler
Sieve with generator
Silo lifting device (high lift truck)
Powder plates
Substrate plates
15x aluminum powder
Oven
Note on the system was only manufactured with steel 1.2709
System description
The Renishaw AM 400 is the latest development of the
Renishaw AM platform and features an increase in laser
power from 200 W to 400 W whilst still maintaining the same
70 µm spot size at the powder bed. It has been designed for
users who require the flexibility to change between different
materials, a range of accessories being available to minimise
the risks of cross-contamination.
The AM 400 is capable of processing build files created for the
standard AM 250 system without additional changes allowing
an easier transition from AM 250 to AM 400. New build files will
be required to fully exploit the additional laser power available
on the AM 400.
AM 400 additive manufacturing system
System specification
Build area X × Y × Z 250 mm × 250 mm x 300 mm (9.8 mm × 9.8 mm × 12 mm)
Build volume X × Y × Z 248 mm × 248 mm × 285 mm (9.7 in × 9.7 in × 11 in)
Build rate* Up to 20 cm3/hr (1.22 in3/hr)
Powder layer thickness In the range of 20 µm to 100 µm (1 µin to 4 µin)
Laser power 400 W
Laser focus diameter 70 µm (3 µin)
Speed scanning Up to 2 m/s (6.6 ft/s)
Speed positioning 7 m/s (23 ft/s)
External dimensions without accessories 853 mm × 1700 mm × 2115 mm (34 in × 67
in × 83 in)
Weight (gross/net) 1225 kg / 1100 kg (2700 lb / 2425 lb)
Running argon consumption after initial fill 50 L/hr ( 61 in3/hr)
Filling/purge argon consumption 600 L to 1500 L (21 ft3 to 53 ft3)
Power supply 220 V to 240 V, 16 A, 45 Hz to 60 Hz, single phase
Compressed air Required
Materials AlSi10Mg, CoCr, In625, In718, stainless steel 316L, Ti6Al4V
Machine dimensions (length x width x height): 1700 x 853 x 2492 mm
Weight: 1360 kg
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Laserschmelzsystem / 3D-Drucker Pulverbettfusion
Der damalige Anschaffungspreis inkl. Zubehör hat EUR 289.850,- betragen.
Nicht mit eingerechnet der Ofen.
Zubehör:
Entfeuchter
Kühler
Sieb mit Generator
Silo Hubvorrichtung (Hochhubwagen)
Pulverflachen
Substratsplatten
15x Aluminiumpulver
Ofen
Hinweis auf der Anlage wurde nur mit Stahl 1.2709
gefertigt
Systembeschreibung
Der Renishaw AM 400 ist die neueste Entwicklung der
Renishaw AM-Plattform und zeichnet sich durch eine Steigerung der Laserleistung
von 200 W auf 400 W aus, während die gleiche
Punktgröße von 70 µm auf dem Pulverbett beibehalten wird. Er wurde für
Anwender entwickelt, die die Flexibilität benötigen, zwischen verschiedenen
Materialien zu wechseln. Eine Reihe von Zubehörteilen ist verfügbar, um das
Risiko einer Kreuzkontamination zu minimieren.
Der AM 400 kann ohne zusätzliche Änderungen Baudateien verarbeiten, die für das
Standardsystem AM 250 erstellt wurden, und ermöglicht so
einen einfacheren Übergang vom AM 250 zum AM 400. Um die zusätzliche
Laserleistung des AM 400 voll auszunutzen, sind neue Baudateien erforderlich.
AM 400 Additives Fertigungssystem
Systemspezifikation
Baubereich X × Y × Z 250 mm × 250 mm x 300 mm (9,8 mm × 9,8 mm × 12 mm)
Bauvolumen X × Y × Z 248 mm × 248 mm × 285 mm (9,7 Zoll × 9,7 Zoll × 11 Zoll)
Baurate* Bis zu 20 cm3/h (1,22 Zoll3/h)
Pulverschichtdicke Im Bereich von 20 µm bis 100 µm (1 µin bis 4 µin)
Laserleistung 400 W
Laserfokusdurchmesser 70 µm (3 µin)
Scangeschwindigkeit Bis zu 2 m/s (6,6 ft/s)
Positionierungsgeschwindigkeit 7 m/s (23 ft/s)
Außenmaße ohne Zubehör 853 mm × 1700 mm × 2115 mm (34 in × 67
in × 83 in)
Gewicht (brutto/netto) 1225 kg / 1100 kg (2700 lb / 2425 lb)
Argonverbrauch im laufenden Betrieb nach Erstbefüllung < 50 l/h (< 61 in3/h)
Argonverbrauch beim Füllen/Spülen 600 l bis 1500 l (21 ft3 bis 53 ft3)
Stromversorgung 220 V bis 240 V, 16 A, 45 Hz bis 60 Hz, einphasig
Druckluft erforderlich
Materialien AlSi10Mg, CoCr, In625, In718, Edelstahl 316L, Ti6Al4V
Maschinenabmessungen (Länge x Breite x Höhe): 1700 x 853 x 2492 mm
Gewicht: 1360 kg