Verified seller 
Häner HHG1100 mini excavator bucket for sale by auction
Olpe
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
$418.80
€360
Germany, Olpe
Excavator class: 1.2-1.9 ton
Working width: 1000mm
Opening width: 258mm
Depth: 350mm
Recording: MS01 (Symlock)
Weight: 94 kg
Volume (SAE) : 67 L
Base body made of (S355J2+N)
HB400 12x110
cutting edge
Back blade made of HB400 12x110
Taper to the rear 2°
1 cylinder swivel angle 2x45°
Load Holding Valve
Hydraulic connections 10L
Backhoe Bucket HTL130MS-BSYM-01 300 mm
Excavator class: 1.2-1.9 ton
Working width: 300mm
Opening width: 389mm
Depth: 456mm
Recording: MS01
Weight: 31 kg
Volume: (SAE) 33 L
Base body made of (S355J2+N)
HB400 16x110
cutting edge
Taper to the rear 3°
Number of teeth: 2 screwed
Backhoe bucket HTL150MS-BSYM-01 500 mm
Excavator class: 1.2-1.9 ton
Working width: 500mm
Opening width: 389mm
Depth: 455mm
Recording: MS01
Weight: 38 kg
Volume: (SAE) 59 L
Base body made of (S355J2+N)
HB400 16x110
cutting edge
Taper to the rear 3°
Number of teeth: 4 screwed
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 1000mm
Öffunungsweite: 258mm
Tiefe: 350mm
Aufnahme: MS01 (Symlock)
Gewicht: 94 kg
Volumen (SAE) : 67 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 12x110
Rückenschneide aus HB400 12x110
Verjüngung nach hinten 2°
1 Zylinder Schwenkwinkel 2x45°
Lasthalteventil
Hydraulikanschlüsse 10L
Tieflöffel HTL130MS-BSYM-01 300 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 300mm
Öffnungsweite: 389mm
Tiefe: 456mm
Aufnahme: MS01
Gewicht: 31 kg
Volumen: (SAE) 33 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Anzahl Zähne: 2 Stück geschraubt
Tieflöffel HTL150MS-BSYM-01 500 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 500mm
Öffnungsweite: 389mm
Tiefe: 455mm
Aufnahme: MS01
Gewicht: 38 kg
Volumen: (SAE) 59 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Anzahl Zähne: 4 Stück geschraubt
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 1000mm
Öffunungsweite: 258mm
Tiefe: 350mm
Aufnahme: MS01 (Symlock)
Volumen (SAE): 67 L
Öffnungsweite: 389mm
Volumen: (SAE) 33 L
Anzahl Zähne: 2 Stück geschraubt
Hydr. Grabenräumlöffel HHG1100MS-BSYM-01 1000mm
Grundkörper aus (S355J2+N)
Schneide aus HB400 12x110
Rückenschneide aus HB400 12x110
Verjüngung nach hinten 2°
1 Zylinder Schwenkwinkel 2x45°
Lasthalteventil
Hydraulikanschlüsse 10L
Tieflöffel HTL130MS-BSYM-01 300 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 300mm
Tiefe: 456mm
Aufnahme: MS01
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Tieflöffel HTL150MS-BSYM-01 500 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 500mm
Öffnungsweite: 389mm
Tiefe: 455mm
Aufnahme: MS01
Volumen: (SAE) 59 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Anzahl Zähne: 4 Stück geschraubt
Clase de excavadora: 1,2-1,9 toneladas
Ancho de trabajo: 1000mm
Ancho de apertura: 258 mm
Profundidad: 350mm
Grabación: MS01 (Symlock)
Peso: 94 kg
Volumen (SAE): 67 L
Cuerpo base hecho de (S355J2+N)
Corte HB400 12x110
Hoja trasera hecha de HB400 12x110
Estrechamiento hacia atrás 2°
1 ángulo de giro del cilindro 2x45°
Válvula
de sujeción de carga
Conexiones hidráulicas 10L
Cubo de retroexcavadora HTL130MS-BSYM-01 300 mm
Clase de excavadora: 1,2-1,9 toneladas
Ancho de trabajo: 300mm
Ancho de apertura: 389mm
Profundidad: 456mm
Grabación: MS01
Peso: 31 kg
Volumen: (SAE) 33 L
Cuerpo base hecho de (S355J2+N)
HB400 16x110
filo de corte
Estrechamiento hacia la parte trasera 3°
Número de dientes: 2 atornillados
Cubo de retroexcavadora HTL150MS-BSYM-01 500 mm
Clase de excavadora: 1,2-1,9 toneladas
Ancho de trabajo: 500mm
Ancho de apertura: 389mm
Profundidad: 455mm
Grabación: MS01
Peso: 38 kg
Volumen: (SAE) 59 L
Cuerpo base hecho de (S355J2+N)
HB400 16x110
filo de corte
Estrechamiento hacia la parte trasera 3°
Número de dientes: 4 atornillados
Kaivinkoneluokka: 1,2–1,9 tonnia
Työleveys: 1000 mm
Aukon leveys: 258 mm
Syvyys: 350 mm
Äänitys: MS01 (Symlock)
Paino: 94 kg
Tilavuus (SAE): 67 L
Pohjarunko valmistettu (S355J2+N)
HB400 12x110
leikkuureuna
Takaterä valmistettu HB400 12x110
Kavena taakse 2°
1 sylinterin kääntökulma 2x45°
Kuormanpidätysventtiili
Hydrauliset liitännät 10L
Kaivinkonekauha HTL130MS-BSYM-01 300 mm
Kaivinkoneluokka: 1,2–1,9 tonnia
Työleveys: 300 mm
Avausleveys: 389 mm
Syvyys: 456 mm
Äänitys: MS01
Paino: 31 kg
Tilavuus: (SAE) 33 L
Pohjarunko valmistettu (S355J2+N)
HB400 16x110
leikkuureuna
Kapena taakse 3°
Hampaiden määrä: 2 ruuvattua
Kaivinkonekauha HTL150MS-BSYM-01 500 mm
Kaivinkoneluokka: 1,2–1,9 tonnia
Työleveys: 500 mm
Avausleveys: 389 mm
Syvyys: 455 mm
Äänitys: MS01
Paino: 38 kg
Tilavuus: (SAE) 59 L
Pohjarunko valmistettu (S355J2+N)
HB400 16x110
leikkuureuna
Kapena taakse 3°
Hampaiden määrä: 4 ruuvattua
Classe de l’excavatrice : 1,2-1,9 tonne
Largeur de travail : 1000mm
Largeur d’ouverture : 258 mm
Profondeur : 350 mm
Enregistrement : MS01 (Symlock)
Poids : 94 kg
Volume (SAE) : 67 L
Caisse de base en (S355J2+N)
Tranchant HB400 12x110
Lame arrière en HB400 12x110
Affiné vers l’arrière de 2°
1 angle de pivot de cylindre 2x45°
Vanne
de retenue
Connexions hydrauliques 10L
Seau de pelleteuse HTL130MS-BSYM-01 300 mm
Classe de l’excavatrice : 1,2-1,9 tonne
Largeur de travail : 300 mm
Largeur d’ouverture : 389 mm
Profondeur : 456 mm
Enregistrement : MS01
Poids : 31 kg
Volume : (SAE) 33 L
Caisse de base en (S355J2+N)
Tranchant HB400 16x110
Affiné vers l’arrière de 3°
Nombre de dents : 2 vissées
Seau de pelleteuse HTL150MS-BSYM-01 500 mm
Classe de l’excavatrice : 1,2-1,9 tonne
Largeur de travail : 500 mm
Largeur d’ouverture : 389 mm
Profondeur : 455 mm
Enregistrement : MS01
Poids : 38 kg
Volume : (SAE) 59 L
Caisse de base en (S355J2+N)
Tranchant HB400 16x110
Affiné vers l’arrière de 3°
Nombre de dents : 4 vissées
Classe dell'escavatore: 1,2-1,9 tonnellate
Larghezza di lavoro: 1000mm
Larghezza dell'apertura: 258mm
Profondità: 350mm
Registrazione: MS01 (Symlock)
Peso: 94 kg
Volume (SAE): 67 L
Corpo di base realizzato in (S355J2+N)
Taglio HB400 12x110
Lama posteriore in HB400 12x110
Affusatura verso il retro di 2°
1 angolo di rotazione del cilindro 2x45°
Valvola
di Contenimento del Carico
Collegamenti idraulici 10L
Secchio a retroescavatrice HTL130MS-BSYM-01 300 mm
Classe dell'escavatore: 1,2-1,9 tonnellate
Larghezza di lavoro: 300mm
Larghezza di apertura: 389mm
Profondità: 456mm
Registrazione: MS01
Peso: 31 kg
Volume: (SAE) 33 L
Corpo di base realizzato in (S355J2+N)
HB400 16x110
filo da taglio
Affusatura verso la parte posteriore di 3°
Numero di denti: 2 avvitati
Secchio per retroescavatrice HTL150MS-BSYM-01 500 mm
Classe dell'escavatore: 1,2-1,9 tonnellate
Larghezza operativa: 500mm
Larghezza di apertura: 389mm
Profondità: 455mm
Registrazione: MS01
Peso: 38 kg
Volume: (SAE) 59 L
Corpo di base realizzato in (S355J2+N)
HB400 16x110
filo da taglio
Affusatura verso la parte posteriore di 3°
Numero di denti: 4 avvitati
Graafmachineklasse: 1,2-1,9 ton
Werkbreedte: 1000 mm
Openingsbreedte: 258 mm
Diepte: 350 mm
Opname: MS01 (Symlock)
Gewicht: 94 kg
Volume (SAE): 67 L
Basislichaam gemaakt van (S355J2+N)
HB400 12x110
snijkant
Achterblad gemaakt van HB400 12x110
Taps naar achteren 2°
1 cilinder draaihoek 2x45°
Belastingsvasthouventiel
Hydraulische aansluitingen 10L
Graafbak HTL130MS-BSYM-01 300 mm
Graafmachineklasse: 1,2-1,9 ton
Werkbreedte: 300 mm
Openingsbreedte: 389 mm
Diepte: 456 mm
Opname: MS01
Gewicht: 31 kg
Volume: (SAE) 33 L
Basislichaam gemaakt van (S355J2+N)
HB400 16x110
snijkant
Taps naar achteren 3°
Aantal tanden: 2 geschroefd
Graafbak HTL150MS-BSYM-01 500 mm
Graafmachineklasse: 1,2-1,9 ton
Werkbreedte: 500 mm
Openingsbreedte: 389 mm
Diepte: 455 mm
Opname: MS01
Gewicht: 38 kg
Volume: (SAE) 59 L
Basislichaam gemaakt van (S355J2+N)
HB400 16x110
snijkant
Taps naar achteren 3°
Aantal tanden: 4 geschroefd
Klasa koparki: 1,2-1,9 tony
Szerokość robocza: 1000 mm
Szerokość otworu: 258 mm
Głębokość: 350mm
Nagranie: MS01 (Symlock)
Masa: 94 kg
Objętość (SAE): 67 L
Podstawa nadwozia wykonana z (S355J2+N)
HB400 12x110
krawędź cięcia
Tylne ostrze wykonane z HB400 12x110
Zwężenie do tyłu o 2°
Kąt obrotu 1 cylindra 2x45°
Zawór
podtrzymujący obciążenie
Połączenia hydrauliczne 10L
Koparka HTL130MS-BSYM-01 300 mm
Klasa koparki: 1,2-1,9 tony
Szerokość robocza: 300mm
Szerokość otworu: 389 mm
Głębokość: 456mm
Nagranie: MS01
Waga: 31 kg
Objętość: (SAE) 33 L
Podstawa nadwozia wykonana z (S355J2+N)
HB400 16x110 krawędzia
cięcia
Zwężenie do tyłu o 3°
Liczba zębów: 2 przykręcone
Łyżka koparkowa HTL150MS-BSYM-01 500 mm
Klasa koparki: 1,2-1,9 tony
Szerokość robocza: 500 mm
Szerokość otworu: 389 mm
Głębokość: 455mm
Nagranie: MS01
Waga: 38 kg
Objętość: (SAE) 59 L
Podstawa nadwozia wykonana z (S355J2+N)
HB400 16x110 krawędzia
cięcia
Zwężenie do tyłu o 3°
Liczba zębów: 4
Clasa excavatorului: 1,2-1,9 tone
Lățime de lucru: 1000mm
Lățimea deschiderii: 258mm
Adâncime: 350mm
Înregistrare: MS01 (Symlock)
Greutate: 94 kg
Volum (SAE): 67 L
Caroseria de bază este realizată din (S355J2+N)
Muchie de tăiere HB400 12x110
Lamă din spate realizată din HB400 12x110
Îngustare spre spate cu 2°
1 unghi de rotație al cilindrului 2x45°
Supapa
de reținere a sarcinii
Conexiuni hidraulice 10L
Găleată cu excavator HTL130MS-BSYM-01 300 mm
Clasa excavatorului: 1,2-1,9 tone
Lățime de lucru: 300mm
Lățimea deschiderii: 389mm
Adâncime: 456mm
Înregistrare: MS01
Greutate: 31 kg
Volum: (SAE) 33 L
Caroseria de bază este realizată din (S355J2+N)
Muchie de tăiere HB400 16x110
Îngustare spre spate cu 3°
Număr de dinți: 2 înșurubați
Găleată cu excavator HTL150MS-BSYM-01 500 mm
Clasa excavatorului: 1,2-1,9 tone
Lățimea de lucru: 500mm
Lățimea deschiderii: 389mm
Adâncime: 455mm
Înregistrare: MS01
Greutate: 38 kg
Volum: (SAE) 59 L
Caroseria de bază este realizată din (S355J2+N)
Muchie de tăiere HB400 16x110
Îngustare spre spate cu 3°
Număr de dinți: 4 înșurubați
Grävmaskinsklass: 1,2–1,9 ton
Arbetsvidd: 1000 mm
Öppningsbredd: 258 mm
Djup: 350 mm
Inspelning: MS01 (Symlock)
Vikt: 94 kg
Volym (SAE): 67 L
Baskropp tillverkad av (S355J2+N)
HB400 12x110
skärkant
Bakblad gjort av HB400 12x110
Avsmalning bakåt 2°
1 cylinder svängvinkel 2x45°
Lasthållningsventil
Hydrauliska anslutningar 10L
Grävmaskin HTL130MS-BSYM-01 300 mm
Grävmaskinsklass: 1,2–1,9 ton
Arbetsbredd: 300 mm
Öppningsbredd: 389 mm
Djup: 456 mm
Inspelning: MS01
Vikt: 31 kg
Volym: (SAE) 33 L
Baskropp tillverkad av (S355J2+N)
HB400 16x110
skärkant
Avsmalning bakåt 3°
Antal tänder: 2 skruvade
Grävmaskin HTL150MS-BSYM-01 500 mm
Grävmaskinsklass: 1,2–1,9 ton
Arbetsvidd: 500 mm
Öppningsbredd: 389 mm
Djup: 455 mm
Inspelning: MS01
Vikt: 38 kg
Volym: (SAE) 59 L
Baskropp tillverkad av (S355J2+N)
HB400 16x110
skärkant
Avsmalning bakåt 3°
Antal tänder: 4 skruvade