AEB Demiplus 50 water purification system
Location:paris
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
$22,700
Netherlands, Apeldoorn
2021 AEB engineering
water demineralization system which has run less than 10 hours and is not used since then
1) Be sure you have an Appropriate Area for the size of the machine
a. Demiplus 50
cm: 106 x 42 x 115 h
b. Demiplus 150
cm: 170 x 75 x 210 h
2) All Demiplus 50 and 150 Fittings are Hose Connector for Hose Ø D32/1”
Water inlet
Demi Water outlet
Drain
3) Provide a Stock Tank for Demineralized Water
a. 20 Hl (StabyMatic 500)
b. 35 Hl (StabyMatic 1000)
4) Electrical Connection: Plug 2 Poles + Earth
220 V
16 A for Maximum Consumption of
a. 1 Kw (Demiplus 50)
b. 1 Kw (Demiplus 150)
Technical Specifications DemiPlus 50 DemiPlus 150
Flow Rate 2000 L/h 4000 L/h
Product Consumption for Regeneration
Acid+Demi
AlcaKg 18 / L 15
Kg 18 / L 14
Kg 52 / L 45
Kg 54 / L 42
Water Consumption for Regenerating
Process
1800 L 3300 L
Requested Regular Water Flow Rate At least 2 Mc/h At least 4 Mc/h
Max Pressure Regular Water Inlet Not over 3/4 Bar Not over 3/4 Bar
Preparations to check before to start up
DemiPlus 50 or 150 Plant
2
5) Air Supply with dryer and constant pressure between 6-8 Bar
Air Supply Fitting is a Quick Coupling for Connection with a 6 mm Tube
6) Enough Regenerating and Cleaning Products “Acid+Demi”
“Alca-“ to start up the plant and
do the first tests
TECHNICAL CHARACTERISTICS
Demiplus consists of
2 fibreglass columns with external epoxy fibreglass filaments
an internal shell in a single piece made of blowmoulded iso-gel
an injection moulded plastic base
injection moulded threaded connections
tested at 8 bar
and filters according to DIN 19643. 2 pneumatic multi-way valves made of PVC
for the management of the functions of all the columns with PVC injectors including the suction of the regenerating solutions inside the column heads. 2 pneumatic valves for the suction of the reagents and reflux control. 2 flow meters to view and control the flow rate of the reagents. Cationic resin macroporous polystyrene cationic resin with strong cross-linking and high exchange capacity. Resistant to oxidation and to osmotic pressures
specific for water and with uniform particle size to minimise pressure drops and maximise cycles. Anionic resin macroporous polystyrene anionic resin with strong cross-linking and high exchange capacity. Resistant to oxidation and to osmotic pressures
specific for water and with uniform particle size to minimise pressure drops and maximise cycles. Control unit for the automatic management of the plant
complete with conductivity reader. Skid frame made of AISI 304 Stainless steel for positioning and mounting of the columns and the service systems required for the operation of the plant. Electric and hydraulic material made of PVC
Find more here
show contacts
Contact us at
show contacts