WK Systemtechnik ILS 600 pipe production line
Pullach6835 km to "United States/Ashburn"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Uzbekistan, Tashkent
Marke: WK Systemtechnik
2019 WK Systemtechnik ILS 600 – HTL –
Ionline Lubrication System
Dickschickt preservation system. The oil is applied via nozzles
The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly
By spraying using two-substance nozzles
the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered
The forming medium is in a closed circuit
the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock
so there is no environmental pollution
General data
Dimensions (WxHxD)
without conveyor units
2486mmx2080mmx2722mm
Dimensions with open doors 3265mmx3510mmx2722mm
Weight approx. 2500 KG
Electrical connection
Supply voltage 400 Volt / 50 Hz
Power 15kVA
Fuse protection 35 A
Control voltage 24 V
Air connection
Air connection 1⁄2’ screw connection
Compressed air supply 6 bar
Air quality Oil and water-free
Preservative oil properties
Flash point
Liquid media with a flash point
flash point >56°C
use
Viscosity at 20°C 1 - 200mm2/s (cst)
Density >0.7 Kg/dm3
Consumption data
Preservative medium Spray air Consumption @
Spray chamber Max. 2.5 l/h 600 l/min
Spray system components
Normal accessories are
Operating instructions ILS 600
Circuit diagram ILS 600
Media circuit plan ILS 600
Data USB stick
Components of the ILS 600: 15
Tight stainless steel collecting tray with stainless steel welded frame
Conservation range
Inlet lock
Spray chamber
Outlet lock
Intermediate container
Analogue level measurement
Compressed air diaphragm pump for filling
Suction lance with level switch
Separators 1 & 2
4 x Activated Carbon Filters
4 x Aerosolfilter
Koaleszer-Filter cassette
Level sensors min / max
Side channel blower K04 with silencer
Spray chamber
Four-sided nozzle units with external preservation nozzles
Nozzle shutdown
Thermally monitored media supply
Sensor-monitored conveyor belt for chamber flow
Compressed air diaphragm pump for filling the oil containers
Pneumatic unit
Maintenance device combination
Mounting plate oil medium 1 & 2
preparation pump
Geared stepper motor
Flow transmitter
High pressure filter
Leak sensor
Feed conveyor belt with motor and sensor monitoring
Inlet side cross conveyor belt with lifting unit
Outlet-side cross conveyor belt with lifting unit
Removal conveyor belt with motor
sensor monitoring and oil collecting tray
Find more re
show contacts
Contact us at
show contacts