FŐKAPCSOLÓ other conveyor

For sale is a used conveyor production line with 29+58 positions – a perfect choice for industrial use. The position change speed can be adjusted from 0 to 255 seconds, making it fully adaptable to different production needs. The equipment can be operated from 380V/230V and can therefore be easily integrated into existing systems. A reliable and versatile solution that helps efficient and flexible production processes!

How the straight assembly line works
(with esza.asm program control)

Operating elements on the control cabinet :
"POWER SWITCH" rotary switch for deactivation,
"START" button to start the "MOVE" operating state,
"STOP" push button to start the "STOP" operating mode,
"EMERGENCY BUTTON" PUSH BUTTON FOR IMMEDIATE ENGINE STOP ,
"UP" button for operating time setting,
"DOWN" button for operating time setting.
Display elements on the control cabinet :
Red indicator light on when "moving" in operating mode,
16-character display for detailed information.
Control elements around the assembly line:
Effect of the opt-out gate (at the end of the ribbon) as pressing the "EMERGENCY BUTTON"
Effect of emergency buttons (anywhere) like pressing the "EMERGENCY BUTTON"
Workplace sensor (bottom) this is where the engine starts to slow down
Display ( high mounted ) remotely visible power on and operating status.
Workplace sensor (under the assembly line) optically detects the mechanic's mandrel.
(To be more precise: the place of detection is when optical detection is about to cease.)
At these points, the tape can stop until the end of the cycle time.
It depends on the value of the configured WORKPLACE DIVIDER parameter,
whether the tape will stop waiting. If the WORKPLACE DIVISOR =0,
then in LIIKU operating state it does not stop when any workplace is detected.
If = 1 , then every slice stops sensing a spike,
if=2 , then the moment after the detection of two spikes is perceived as a workplace.
Operating conditions:
Enters EMERGENCY mode:
after pressing the emergency button.
The display flashes "EMERGENCY BUTTON!?"
Possible event:
Reset the emergency button.
CHIN enters operating state:
after switching on, or
after pressing and resetting the emergency button, or
Pressing/releasing the "STOP" button ("STOP!" on the display!), and
after reaching the next job.
(If it doesn't find a job in about 4 seconds, it stops.)
The engine is stopped. The red indicator light is off.
On the display: the last saved cycle time (max. 255 s) and "STAND".
Possible events:
pressing the emergency button , or
"GO" gom pressing/release, or
Press the "UP" and "DOWN" buttons together for about 3 mps.
MOVE into operating mode:
"START" button after pressing/releasing it.
The motor rotates to the workplace sensor, stands here until the end of the cycle time, and then
then he goes on. The red indicator light is on.
Display: last saved cycle time (max. 255 s) motion star
and the time remaining until the end of the cycle time.
Possible events:
Press the emergency button, or
Press/release the "STOP" button.