Sidel PET Aseptic filling line SidelThere are 2 capacities: 18.000 lt other beverage equipment
Burgwald-Ernsthausen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 1515 43...
Show
+49 1515 4364560
+49 6457 ...
Show
+49 6457 91310
+49 6457 9...
Show
+49 6457 913120
Germany 
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Menslage
Germany, Menslage
There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes
Capacity:
36.000 bph by 0,5 ltr. and 0,4 ltr.
18.000 bph by 1,5 ltr.
Year of manufacturing: 2006 - 2025
Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians.
The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak.
Over the years, all main electronic components are upgraded and updated according to the OEM, based on availability on the market and latest models.
The line is in a very good condition and it is still in production.The line can be inspected.
The line is consiting of:
Blowing machines:
Sidel SBO (2 pcs) 18,000 bottles / hour each. Upgraded with new preform chain design, pre-blowing and blowing block valve optimized in 2025.
Filling equipment:
1. Aseptic filler Sidel type FMI 70 with decontamination areas for bottles and caps and 70 filling vales with sterile design. Change parts for 0,4L, 0,5L and 1,5L bottles.
Filling speed: 36,000 bottles / hour for 0,5L and 0,4L and 18,000 bottles / hour for 1,5L bottles.
2. VBS liquid N2 dosing system with sterilization module
3. Capper (upgraded for tethered caps 38mm) – producer Zalkin France
4. Data coder Videojet (ink) with tradability connection – communication with filler PLC
5. Full bottle inspector (filling level and caps) Heuft – produced in 2025
Packaging equipment:
1. Roll on labeling machine Contiroll (Krones – 2012) speed: 42,000 bottles / hour
2. Sleever labeling machine Sleevematic (Krones – 2017) speed: 42:000 bottles / hour
3. Automatic sleeve feeding system with a magazine of 6 sleeve reels and automatic change, including buffer
4. Labeling inspector (Krones- 2017)
5. Sleeve steam oven (Krones – 2017)
6. Packer: Zambelli – 3000 packs / hour upgraded in 2025 (film feeding and cutting system and software)
7. Palletizer (Sidel Cermex – 2006)
8. Stretch wrapper Robopac – Italy – 2006 upgraded in 2015
Caps feeder (Sidel)
Empty bottles inspectors and caps inspectors: Presco – digital cameras (2pcs)
Processing Equipments:
1. Almix (Tetra Pak) – concentrate (powder) dissolving system
2. Alblend (Tetra Pak) – mixer with a mixing ratio range: 1:2 – 1:5
3. TADrink (Tetra Pak) – pasteurizer with tubular heat exchanger, heat recovery, intermediate primary heating agent (steam / hot water/ product) and intermediate cooling agent (water with propylene glycol/treated water/product)
a. There are 2 capacities, depending on the bottle size: 18,000 l/h and 27,000 l/h
b. Pasteurization temperature: 94-96 oC holding time between 20 and 40 seconds, realized by configuration of holding tubes.
c. Inlet temperature: 20 oC – outlet temperature 30 oC - 35 oC
d. Efficient vacuum deaeration system – DO for output product with
verfuegbarkeit: sofort
prio: 96
teaser: Maschine ansehen