New MEP Vollautomat SHARK 332-1 NC 5.0 metal band saw
Ahaus6353 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 2561 9...
Show
+49 2561 938471
+49 2561 9...
Show
+49 2561 938436
Germany 
capacity 90 degrees: flat 330 x 260 mm
capacity 90 degrees: square 260 x 260 mm
capacity 45 degrees: round 260 mm
capacity 45 degrees: flat 270 x 200 mm
capacity 60 degrees: round 180 mm
capacity 60 degrees: flat 170 x 170 mm
height of material-table 600 mm
Pitch min/max 50.000 mm
vice 335 mm Öffnung
band speed 15 - 100 m/min
automatic feeds 600 mm
dimensions of saw-band 3650 x 27 x 0,9 mm
total power requirement 2,2 kW
weight 1.105 kg
range L-W-H 3,3 x 2,83 x 2,23 m
Electro-hydraulic fully automatic band saw, with additional:
* semi-automatic
* semi-automatic dynamic
* manual operation
Description :
- Automatic cycle (cuts from 0 ° to 60 ° left)
- Semi-automatic, semi-automatic-dynamic and manual cycle
- Cuts from 45 ° right to 60 ° left
- Manual or semi-automatic dynamic cycle
- to make cuts without programming
- Numerically controlled band saw machines
- with the new, specially developed by MEP for automatic machines
Windows CE based control
- User interface with 7 touch screen display and mechanical buttons for
the operational functions of the sawing machine, guarantees reliable
peration, simple and intuitive, and real-time control of all cutting
parameters.
- Protective housing for the safety of the worker
- The control console on a swivel arm allows a comfortable and
safe operation from any position
- Display and entry of alarm and error messages with the option of
report the incidents that have occurred.
- Stepless regulation of the cutting speed from 15 to 100 m / min
Frequency converter (inverter).
- The latest generation of hydraulic power packs, extremely powerful with little
Power consumption.
- Material feed with stepper motor via ball screw, which on
opposite ball bearing is mounted; Single stroke 600 mm repeatable to
saw any length.
- Positioning of the saw head and movement of the feeder using the joystick.
- Automatic detection of the cutting start position
- Manually operated strap tension control with indication on the
display by means of electronic converter
- Automatic monitoring of the cutting load through a directly on the
Cylinder mounted servo valve
- The coolant pan (provided with 2 electric pumps for lubrication and
Cooling of the saw band) is built into the underframe
- The chip drawer can be replaced by a motorized chip conveyor
- see special accessories
- Preparation for the installation of the OPTIONAL minimum quantity
lubrication system together with the conventional standard lubrication
with emulsion oil.
- Chip removal brush
- Bimetal saw band for solid and profile material
- Tools and instructions for use with a list of spare parts
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schnittbereich bei 90 Grad: flach 330 x 260 mm
Schnittbereich bei 90 Grad: vierkant 260 x 260 mm
Schnittbereich bei 45 Grad: rund 260 mm
Schnittbereich bei 45 Grad: flach 270 x 200 mm
Schnittbereich bei 60 Grad: rund 180 mm
Schnittbereich bei 60 Grad: flach 170 x 170 mm
Vorschub min/max 50.000 mm
Bandgeschwindigkeit 15 - 100 m/min
Vorschub automatisch 600 mm
Gesamtleistungsbedarf 2,2 kW
Gewicht 1.105 kg
Abmessung L-B-H 3,3 x 2,83 x 2,23 m